Signs You Need A Heavy Construction Equipment Windshield Repair
Heavy equipment is often used in challenging environments. For example, many of them can be found in construction sites where they might lift hefty materials or dig into the ground. In this type of setting, operators need to be aware of their surroundings at all times. They must also have a well-maintained machine with trouble-free components. Anything less could compromise their safety. Below are a few signs that you need a heavy construction equipment windshield repair:
Signs You Need A Heavy Construction Equipment Windshield Repair
Contents
In this article, we discuss some of the tell-tale signs that indicate that your heavy construction equipment requires a windshield repair.
Your Windshield Has A Compromised View
Operators of construction equipment have to see if there are debris overhead, obstructions in front, or impediments at the back. The faster they can detect these anomalies, the better their chances of avoiding danger. If the view of the driver is compromised in any way, then it will be hard to see what lies ahead. The operator could make costly errors that result in injury or worse. For example, there might be a big crack on the glass, or windshield, that reduces visibility and slows down work. The operator may head straight into a hole without realizing it. A timely heavy equipment repair could avert such a disaster.
Damage On The Windshield
The Occupational Safety and Health Administration (OSHA) has provided general guidelines when it comes to heavy equipment operation. All of the vehicles under this category must have three types of brakes including a service brake, an emergency brake, and a parking brake. They should have working light sources including tail lights, headlights, and brake lights. These vehicles must have an audible horn or warning device. Lastly, the construction equipment’s windshield must be intact with operational wipers.
An intact windshield is structurally strong. It should be able to withstand impact due to flying debris and other hazards around a construction site. Having one is important if you want to keep your workers safe and sound. If you see any type of damage on the glass panel, then study it carefully. Cracks and chips are signs of weakening, possibly because of a prior impact. Due to their diminished state, these damaged windshields are less effective in absorbing force in the event of a collision. The panel may finally break apart and leave the operator vulnerable. Clearly, a windshield repair should be performed before something like this can happen.
Heavy Construction Equipment Windshield Repair Tips
1. Check The Windshield Before Each Shift
Operators should be trained to handle heavy equipment and recognize signs of trouble. They must begin each shift by doing a thorough inspection of the vehicle including all of the vital components. They should check whether the brakes are working or not. Furthermore, they should see to it that the lights are responsible and that the horn is suitably loud. They must also look at the surface of the windshield to make sure that there are no new pits, chips, or cracks that merit further attention.
2. Do Not Ignore Minor Blemishes
It is not uncommon to see windshields with hairline cracks in cars speeding across highways. The same is true for heavy equipment in construction sites. It is easy to ignore minor windshield blemishes because people think that they are small issues that do not affect performance. Unfortunately, this is far from the truth. Even minor chips and cracks on a windshield signify a large reduction in structural integrity. Take any windshield damage seriously and act appropriately to get the panel back to full strength.
3. Repair Your Construction Equipment’s Windshield As Quickly As Possible
When you see a need for repairs, schedule the service as soon as possible. Do not wait for things to get worse before you move. A lot can happen in between. Minor issues can also be repaired relatively quickly and at a much lower cost. If the chips and cracks grow bigger, then you are likely to pay more for repairs. You might even have to shell out a large sum for windshield replacement in advanced cases.
Liberty AutoGlass is capable of handling all types of windshield repairs, including those of heavy construction equipment. The business has been operating since 2002 and has grown steadily since then thanks to customer loyalty. If you want affordable and transparent pricing in Pennsylvania, then call Liberty AutoGlass today.
Call Liberty AutoGlass For All Of Your Windshield Repairs & Replacements
Call Liberty AutoGlass when you need an experienced and dependable auto glass shop in the area. Our team of licensed auto glass technicians can provide superior auto glass services, including chipped windshield repair, windshield replacements, and more. Liberty AutoGlass also works with all major insurance companies. We can handle your claim from start to finish.
The shop has certified technicians with the skills and experience to deal with any related problems. You can expect honest assessments, reasonable and transparent rates, and exceptional services. Call Liberty AutoGlass to schedule a free estimate today.
Click here to contact us today or give us a call at (610) 377-7787 or (877) 90-GLASS if you have any questions.
